More Offers ⨯
IN THE BOX | |
---|---|
Sales Package | Crestron CLSI C6A and User documentation |
General | |
---|---|
Brand | Crestron |
Model | CLSI-C6A |
Year | |
Color | White |
Dimension | |
---|---|
Height | 4.48 in (114 mm) |
Width | 8.89 in (226 mm) |
Depth | 2.47 in (63 mm) |
Weight | 1.43 lb (649 g) |
Specifications | |
---|---|
Dimmer Channels | 6 |
Maximum Per Channel | 800 Watts/VA (3.5 Amps @ 230 Volts AC) |
Minimum Per Channel | 25 Watts/VA (0.108 Amps @ 230 Volts AC) |
Module Total | 2200 Watts/VA (10 Amps @ 220 Volts AC); 2300 Watts/VA (10 Amps @ 230 Volts AC); 2400 Watts/VA (10 Amps @ 240 Volts AC) |
Load Types | LED[1], Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, 2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic Low-voltage, 3- and 4-Wire Fluorescent, High-Inrush Switching, & 277V via CLS-EXP Series expansion modules) |
Power Requirements | 220 to 240 Volts AC, 50/60Hz line power |
Connections | |
---|---|
LOCAL DEVICES | (1) 4-pin 5mm detachable terminal block; Cresnet® Master port for local devices including: C2N-DB and CNX-B Series keypads, 16 maximum; C2N-SSC-2 and C2N-SDC-DC shade controllers; 16 maximum; Additional CLSI-C6 or CLSI-C6M units, 8 maximum; Additional CNPWSI-75 or other Cresnet power supply required beyond 4 devices; C2N-SDC-DC always requires an additional power supply |
CONTROL SYSTEM | (1) 4-pin 5mm detachable terminal block; Cresnet Slave port for connection to a control system |
HOT | (1) Captive screw terminal[3], line power input |
LOAD1 – LOAD6 | (6) Captive screw terminals[3], dimmer channel outputs 1 – 6 |
NEUTRAL | (1) Captive screw terminal[3] |
GROUND | (1) Captive screw terminal[3] |
PC (front) | (1) 3.5mm TRS mini-phone jack, RS-232 Programming port |
Controls | |
---|---|
Buttons 1 – 6 | (6) 3-position rocker pushbuttons; configurable to recall (or toggle recall/off) individual scenes, control shades, or for master lighting or shade control; “scene mastering†option enables manual dimming utilizing rocker button action; also used to adjust lighting levels when in “Lighting†mode and shade positions when in “Shades†mode; additional functionality configurable via software |
Up/Down Button | (1) 3-position rocker pushbutton; configurable for master lighting or shade control, or as a “shift†for Buttons 1-6; additional functionality configurable via software |
ON | (1) pushbutton, recalls “On†scene |
OFF | (1) pushbutton, turns all lights off |
LIGHTS, SHADES | (2) Pushbuttons, select “Lights†or “Shades†modes |
SAVE, CANCEL, ∧, ∨ | (4) Pushbuttons, navigate and execute setup functions |
Reset | Recessed miniature pushbutton for hardware reset |
Dimming Ramp Rate | 5 seconds (default), software adjustable 1 to 10 seconds |
Scene Fade Time | 2 seconds (default), software adjustable 0 seconds to 99 minutes |
LED Indicators | |
---|---|
Scenes | (6-white) Correspond with each “Scene†Button |
High/Low | (2-white) Indicate “Shift†status |
ON | (1-white) Indicates “On†Scene is selected |
LIGHTS, SHADES | (2-green) Indicates “Lights†or “Shades†mode is active |
SAVE, CANCEL | (2-green) Correspond with “Save†and “Cancel†Buttons |
MIN, SEC | (2-green) Indicates display of “Minutes†or “Seconds†|
1 – 6 | (6-green) 7-Segment bargraphs, indicate lighting levels and shade positions |
Numeric Display | (2-green) 8-Segment digits, indicates modes and setup values |
IR Receiver | |
---|---|
Reception Frequency | 36 kHz (Requires CLS-IRHT8 IR remote, sold separately) |
Environmental | |
---|---|
Temperature | 32° to 104°F (0° to 40°C) |
Humidity | 10% to 90% RH (non-condensing) |
Enclosure | Mounts in a 4-gang electrical box, 3-1/2" (89 mm) deep minimum |
Warranty | |
---|---|
Warranty Type | Official manufacturer warranty |