More Offers ⨯
IN THE BOX | |
---|---|
Sales Package | Mouse,Receiver, User documentation |
General | |
---|---|
Brand | Crestron |
Model | DM-RMC-4K-SCALER-C |
Year | |
Color | black |
Dimension | |
---|---|
Height | 12.51 in (318 mm) |
Width | 5.37 in (137 mm) |
Depth | 1.08 in (28 mm) |
Weight | 1.38 lb (625 g) |
Specifications | |
---|---|
Scaler | 4K video scaler, motion-adaptive deinterlacer, intelligent frame rate conversion, Deep Color support, content-adaptive noise reduction, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing up to 8 wide x up to 8 high [9] |
Input Signal Types(video) | DM 8G+ & HDBaseT w/Deep Color, 3D [8], & 4K |
Output Signal Types(video) | HDMI w/Deep Color, 3D [8], & 4K (DVI compatible [2]) |
Input Signal Types(audio) | DM 8G+, HDBaseT |
Output Signal Type(video) | HDMI, analog stereo [6] |
Digital Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels |
Analog Formats | Stereo 2-Channel [6] |
Digital-To-Analog Conversion | 24-bit 48 kHz |
Analog Performance | Frequency Response: 20 Hz to 20 kHz ±0.5 dB; S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted; THD+N: <0.005% @="" 1=""> Stereo Separation: >90 dB |
Analog Volume Adjustment | -80 to 0 dB |
Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP |
RS-232 | 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system) |
IR/Serial | 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system) |
DigitalMedia | DM 8G+, HDCP 2.2, EDID, CEC, PoDM+, Ethernet |
HDBaseT | HDCP 2.2, EDID, CEC, PoE+, Ethernet |
HDMI | HDCP 2.2, EDID, CEC |
Power Pack (included) | Input: 100-240 Volts AC, 50/60 Hz; Output: 1.25 Amps @ 24 Volts DC; Model: PW-2412WU |
Power over DM (PoDM) | IEEE 802.3at Type 2 Class 4 (25.5 W) compliant PoDM+ PD (Powered Device), capable of being powered by a PoDM+ PSE (Power Sourcing Equipment) [3] |
Power over HDBaseT | IEEE 802.3at Type 2 Class 4 (25.5 W) compliant HDBaseT PoE+ PD (Powered Device), capable of being powered by an HDBaseT PoE+ PSE (Power Sourcing Equipment) [4] |
Power Consumption | 18 Watts |
Temperature | 32° to 104° F (0° to 40° C) |
Humidity | 10% to 90% RH (non-condensing) |
Heat Dissipation | 63 BTU/hr |
Chassis | Metal, black finish, with (2) integral mounting flanges, vented top, front, and bottom |
Mounting | Freestanding, surface mount, or attach to a single rack rail |
Connectors | |
---|---|
COM | (1) 5-pin 3.5 mm detachable terminal block; Bidirectional RS-232 port; Up to 115.2k baud, hardware and software handshaking support |
IR 1 – 2 | (1) 4-pin 3.5 mm detachable terminal block; Comprises (2) IR/Serial ports; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud |
AUDIO OUT L, R | (1) 5-pin 3.5 mm detachable terminal block; Balanced/unbalanced stereo line-level audio output [6]; Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced; Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced |
RELAY 1 – 2 | (1) 4-pin 3.5 mm detachable terminal block; Comprises (2) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
Ground | (1) 6-32 screw; Chassis ground lug |
LAN | (1) 8-pin RJ45 female, shielded; 10Base-T/100Base-TX Ethernet port |
HDMI OUT | (1) 19-pin Type A HDMI female; HDMI digital video/audio output (DVI compatible [2]) |
DM IN | (1) 8-pin RJ45 female, shielded; DM 8G+ input, HDBaseT compliant; PoDM+ PD port (HDBaseT PoE+ compatible) [3,4]; Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1] |
24VDC 1.25A MAX | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2412WU power pack included |
Controls & Indicators | |
---|---|
ACT | (1) Green LED, indicates activity |
SETUP | (1) Red LED and (1) recessed pushbutton, for Ethernet setup |
RESET | (1) Recessed pushbutton, for hardware reset |
LAN | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity |
HDMI | (1) Green LED, indicates video signal presence at the HDMI output |
DM IN | (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence |
24VDC | (1) Green LED, indicates operating power supplied via PoDM+, HDBaseT PoE+, or local power pack |
Warranty | |
---|---|
Warranty Type | Official manufacturer warranty |